|
|
INSULATION
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
Efficient thermal insulator; thermal conductivity ( K-factor = 0.017 Kcal / m / hr / ํC )
-
Light weight and hardness (when being pressed, foam will not collapse).
-
Attachable to almost all types of paper, plywood, steel plate, aluminium, concrete, tiles, etc.
-
Gluey or sticky : able to stick between 2 sides of materials.
-
Low percentage of moisture-proofness (If an in-sulator absorbs water and moistrue, its insulation coefficiency will change.)Since the foam consists of closed cells, its K factor will be stable for a long time and gradually change a little
-
Polyurethane foam is an excellent insulator between the effective temperatture of -118 ํC and 100 ํC
-
Flame resistance; inflammable but self extinguishment since it comprises extinguishants.
-
Binding the products; when injecting into the products, there will not be any space, the air bubbles of foam will promptly attach to the surface of the preducts, thus will not cause any vapour and will reduce the loss of coolness.
-
Rustproof and resistant to acids and alkalines
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 M-PE Aluminium Foil 
Technical data of M-PE |
|
|
|
|
|
|
Insulation material in sheet form made of Polyethylene
of Low Density Polyethylene (LDPE) providing efficient
insulation against heat transfer from outside into the
building and durability
Thermal insulation properties
- Structure
Closed cell type with tiny air pockets which provide insulation against heat transfer
- Thermal Conductivity
K-Value of 0.03 W/mk which is superior compare to most other insulation material
- Water Vapor Transmisson Rate at
0.01 g/m hr which is significantly low rate and prolong the life of P.E. closed cell type of insulation sheet
- Non-Toxic
P.E. is common base material for water pipe, toy, food packaging and other recyclable packaging material
- Chemical Resistance
Resistance against acid, alcohol which make P.E. sheet insulation suitable for chemical factory. P.E. sheet will resist attack by chemical vapour which is detrimental to metal sheet roof and siding
- Sound
P.E. Insulation insulation laminate to directly attached to metal sheets also helps to absorp noice during rain fall on roofing sheets
- Thermal Insulation
Insulate against heat from outside being transfered into the building which make P.E. sheet as insualtion material for factories, warehouses, and even residence
- Enhanced lighting inside
Metalized P.E. sheet reflects light which enhances general lighting inside building, heat reflection also help save electricity
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Microfiber is an insulation material of glass wool manufactured to TIS 486,TIS 487, NFPA 90A (National Fire Protection Association, INC.) and international standard ASTM in roll and insulation consistent thickness throughout due to its elasticity property and does not deform by compression laminated with aluminium foil for reinforcement and protection against moisture.
Microfiber lamination material is of high quality and complies to International Standard such as ASTM (American Society for Testing and Materials), UL and BS (British Standard).
Microfiber Insualtion material is laminated by lamination material ensuring strong bonding of lamination to insulation material, ease of installation and aesthetic finish.
Microfiber offers variety ranging from 1 side aluminium foil lamination, 2 sides lamination as well as choice of white foil or black foil. Feature and Benefits
- Thermal Resistance
- Sound Insulation
- Condensation Control
- Save Energy
- Recovery Property ensuring consistent thickness
- Easy to Install
- Nonflammable
- Long Life Performanc
|
|
|
|
|
|
|
|
|
| |
Polynum Insulation Material์
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Polynum is thermal insulation material consisting of 3 layers, 2 outer layers are pure aluminium foil reflecting heat up to 97%. In between both layers is air bubble and reinforced by Polyethelene.
- Efficient prevention of thermal transfer into building
- Reduced load on air conditioning units and save energy
- No dust and hazardous substance therefore safe and healthy living environment
- Aesthetic, strong, durable and long service life
Research indicates that 80% of thermal energy transfer through roofing and 90% of thermal energy transmit by radiation. Polynum thermal insulation design to counter heat radiation with specific feature preventing thermal radiation up to 97%.
Therefore Polynum is a preferred choice for tropical climate country such as Thailand saving electricity up to 60%.
Polynum is suitable for projects such as Industrial building, warehouse, School, Resident, Sport center, and others; Polynum can be installed with roofing of metal sheet, cement tile, concrete and wall cladding and others.
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- The coated aluminium layer has been thickened to enchance its resistance to UV radiation explosure,while at the same time the non organic and opaque nature of the strip is more able to prevent damage by UV radiation degradation over time. Durability of the coated film is also increased, and the greater barrier properties afford lower permeability to the passage of water vapour.
- Extra polymers have been added into the structure which further counter the solar energy
- While the expanded metal content intensifies the toughness of Aluminium Foil, it also enable the installers to work easier because of its heaver and harder product feel. Thus, installers can more easily conform the material to the shape of the uneven surfaces.
- The new coating procedure reliably coats all metallic surfaces uniformly so that the low emissivity properties of the surface are not harmed by atmospheric contaminates.
|
|
|
